Install canon mf3010 printer driver.
The printer’s internal memory is up to 64 MB of RAM as a shared feature for all printer functions. Scanning with this device works through the contact image sensor (CIS) mode. Moreover, this mode has a minimum print resolution of up to 600 x 600 dots per inch (dpi). Download Canon i-SENSYS MF3010 driver from Canon Website
Furthermore, the optical resolution in scanning is up to 600 x 600 dpi with a color depth of 24bit/24bit for both input and output. But it also has an enhanced resolution that can reach 9600 x 9600 dpi. The maximum scanning width is about 216 mm, while the standard paper tray can take up to 150 sheets of plain paper. On the other hand, its output tray will also take 100 sheets of printed documents. Download Canon ImageClass MF3010 driver from Canon Website Canon ImageClass MF3010n machine uses the laser print technology to produce all-in-one functionality. Its available functions include printing, copying, and scanning to deliver the best performance of output. The printing rate is up to 18 pages per minute (ppm) when using the A4 paper. Besides, the average print resolution is about 600 x 400 dots per inch (dpi). However, the optimum print quality resolution is up to 1200 x 600 dpi with the automatic image refinement (AIR) component.
- When clicking [Run] on the file download screen (file is not saved to disk)1. If the User Account Control prompt is displayed, click [Yes], and then click [Run] on the subsequent Security Alert screen.2. The Setup Wizard will start.3. After the Setup Wizard has started, follow the instructions on the screen to perform installation. Canon India Pvt. Ltd., and its affiliate companies (“Canon”) make no guarantee of any kind with regard to the Content, expressly disclaims all warranties, expressed or implied (including, without limitation, implied warranties of merchantability, fitness for a particular purpose and non-infringement) and shall not be responsible for updating, correcting or supporting the Content.
Use canon mf3010 printer driver.
- When clicking [Save] on the file download screen (file is saved to disk at specified location)1. Save the file to an apporopriate location, and then double-click the file (double-clicking the file will create a new folder in the same location).2. If the User Account Control prompt is displayed, click [Yes].3. The Setup Wizard will start.4. After the Setup Wizard has started, follow the instructions on the screen to perform installation. According to a basic standard, the machine loads paper from the significant input tray takes up to 150 sheets of plain paper. Otherwise, the output tray will hold up to 100 sheets of printed paper in a face-down manner. This machine allows a paperweight between 60 and 163 gsm. It can also zoom in/out of the output image to a degree between 50 and 200% of the original document size. However, the gradual increments are in 10% degrees within this range. The first print out time is about 7.8 seconds and is compatible with the UFRII-LT print language. It leaves a print margin of 5 mm at the top, left, and right, but the bottom margin is about 6 mm. This machine also has a toner saver mode that helps to maintain the print resources. When copying, the rate of reproduction is up to 18 ppm with the A4 paper. Subsequently, the first copy output time is approximately 12 seconds or less. Its copy resolution is up to 600 x 600 dpi. At the same time, it is compatible with text, photos, and a combination of both text and image. Under multiple copies, this machine can produce up to 9 copies from a single original document. Simultaneously, the zoom range is also between 50 and 200% in 10% gradual increments. Some other notable features of the copying mode include 2-on-1 and the ID card copy. Scanning with this device supports color documents. It also has up to 256 levels of a halftone. While printing, the machine takes about 2 seconds or less to recover from the sleep mode. However, it takes about 0.3 seconds or less to print from sleep mode. On the other hand, the warm-up time from the “Power On” the way requires up to 10 seconds to be ready for full operation. The first copy output time is about 12.0 seconds for A4 paper and 11.8 seconds for a letter-sized report. Canon reserves all relevant title, ownership and intellectual property rights in the Content. You may download and use the Content solely for your personal, non-commercial use and at your own risks. Canon shall not be held liable for any damages whatsoever in connection with the Content, (including, without limitation, indirect, consequential, exemplary or incidental damages).